No, this isn’t going to be some review page or sales page where all I do is recommend that you spin your PLR articles and publish them. In fact, I hope you can learn something from the ideas and method that I present here for you. So, Let’s get started.
Content spinning or article spinning is an SEO technique that is frequently used by countless online marketers, bloggers, website owners, businesses, etc.
The concept behind article spinning is basically a simple process, just place a text-based piece of content such as an article, blog post, or word document into the software and let it perform its magic. Well, it’s really not magic, but more like a word jumble. The software generates a number of variations from the original text by choosing certain words and/or phrases and replaces them with synonyms.
Of course, the all-important question is whether or not you should consider using any type of article spinning software. Many marketers consider them to be useful and others do not.
Whether you choose to spin content or not is entirely up to you. If you use some type of spinner now or used one before, you’re already familiar with what they can do and cannot do. So, I’m not going to go in-depth with a lot of the processes. However, I will cover some basic points of the Spin Rewriter software and what it can be useful for.
But first, you might be curious to know that I have been using Spin Rewriter for a couple years now. In fact, I think it was Version 7 or 8 when I first joined and today it’s on the upgraded Version 10 which was introduced in October 2019.
Spin Rewriter is also entirely web-based so there’s no worry of downloading and installing on your computer.
Now, back to what I was explaining before as to why I use the software. I operate and utilize a few different niche websites, or what marketers usually refer to as affiliate sites or money sites. No, the spun content is not used for those sites (unless the content produced is adequate, which is extremely rare – I’ll explain that in just a minute).
Truthfully speaking, and this is something that you should consider… Spun content should never be used for your branded or money sites. If that’s the case, why use an article spinner at all?
Well, the best way to explain it would probably be in the example image I created below:
Notice in the image above that there’s 3 sites – a money site, a tier 1 site, and a tier 2 site.
The money site or affiliate site is centered around the Fly-Fishing niche and remember, you do not use article spinner content for your branded niche site. It’s a no-no. Now, the good news is that any of your tier 1 or tier 2 sites can be loaded with spun content. In fact, depending on how many tier levels sites you have and whether or not you like to write, a lot, spun content might be the answer for you. Just make sure that the content you do use on the tier level sites is relevant to your money site(s). In the example above, relevant content would be centered around Fly Fishing. The whole purpose of these tier level sites is to create backlinks and improve SEO to your money site(s). Now, this is not a lesson in SEO so I’m not going to spend time covering the finer points with this.
Okay. Now that I’ve demonstrated one of the areas that article spinning content is useful for, let’s go over the proper way and the process of using the content that has been run through an article spinner.
Contrary to what you might have learned or even heard before about the use of article spinner content, let’s just put all that aside for right now. It will simply make things easier.
I’m going to be using Spin Rewriter and log into my account. After you login, you’ll be taken to the control panel where you’ll notice several options available. I’m simply going to concentrate on rewriting a single article and will click on the “Rewrite a Single Article” tab.
After clicking the tab, another page will open that begins with step 1 Enter your article. This is where you would simply paste the text you want to work with and spin. For this demonstration, I’m going to use a PLR article on the subject of fat loss and muscle building.
Next, after pasting my text I’ll click on the settings tab and verify the commands that I wish to use. I have to be honest as these can be tricky and take practice when adjusting. It’s not complicated at all, but you do need to practice. After all, Spin Rewriter is just like any other software you would buy and use. You take time to learn it and eventually master it. For the sake of this demonstration, I’m just selecting options at random. The options in the image above are for sentences and paragraphs.
Next, while still within the settings tab, I’ll move over to the sub-heading of words & phrases. First, the adjustment for making articles readable and unique. The center position is usually best, but for this example I’m choosing the most readable option (which by the way is less unique). Below that is the protected keywords option. You don’t need to use this option, but if you want any key terms to remain it might be useful. You’ll notice in the example that I’ve added a number of key terms in the box.
Next, while still in the settings area, I’ve chosen the Advanced Settings sub-heading. These are just some added features that are useful for speeding up the process. In this example I’ve chosen all 3 to be on for this article. After you finish, click the OK tab to move on.
In the image above and after going through the settings, the article is now ready to go through the rewrite process. Simply click the Rewrite tab.
While it’s processing, you’ll get a warning of the progress.
When the process is done, you’ll see a screen like the one above. Simply click the One Click Rewrite tab to start the next phase.
Once again, a warning will appear telling you of the process and time remaining.
After the One Click Rewrite process has finished, simply click the Finalize Article tab.
If you’ll notice in the image above, Step 3 is created with Generate unique versions of your article. Click the Generate a Unique Article tab. By the way, you can click that tab as many times as you want until you are satisfied or find a finished article that you feel comfortable working with.
That’s it, that’s all there is to article spinning. You now have a new base article and content to work with. Of course, if you’re new to the idea, new to online marketing, don’t like to write, or you’re just lazy, this might be the last step for you. However, I want to point you in the right direction and make sure you get the most out of using this software. I bet you won’t hear that in a product review!
My point is for you to understand that article spinning can be an effective strategy if done in an acceptable manner and what I would consider the right way. Of course, some people will say that I’m wasting time or full of you know what!! Well, that’s just their opinion.
Let’s go into the next step that many people simply ignore and do not bother with, and that is to go over the spinner content or finished article. Why? Well, once again I’ll be honest with you. Article spinners are not humans, which means the content produced most often sucks! Although, there is some light at the end of the tunnel for those that do it correctly and I’ll demonstrate what I’m talking about in the image below.
I took a finished article that I randomly chose from the generated articles as previously shown. In the image above, the original PLR article that I placed in Spin Rewriter is on the right side. The spun article that I chose is on the left side. Keep in mind the settings that I opted for above before spinning the article. I chose the least amount of changes and the least amount of uniqueness, which means I concentrated more on readability.
From here, I’ll work on the spun article while keeping the original article in view and make changes as I see fit. Many people often wonder, why waste time going over the spun article? I guess the simplest answer is quality. That’s my answer anyway.
Let’s finalize what I’ve done with Spin Rewriter. The first article below is the Original PLR article, and below that is the spun article after I modified and edited it.
Original PLR article
2 Simple Steps To Ripped Summertime Muscles
Summer is on the horizon, and the time has come to kick back and relax under the sun. It’s time for beach days, barbecues and pool parties, and for any serious weightlifter these activities also mean one thing: it’s time for the shirts to come off and to showcase that rock-solid physique they’ve been working on all year. No one wants to be walking around with a soft, smooth and flabby body, and for the next month or two, all of those serious lifters will be shifting into “get ripped” mode.
How do they usually go about this?
They lighten up the weights and perform higher reps.
This has always been a widely accepted method of “cutting down” and if you ask most trainers in the gym they’ll tell you that “heavy weights bulk up the muscle and lighter weights define the muscle”.
Do you want to know the reality behind the “light weight and high reps” method of obtaining a ripped and defined physique?
It is completely, totally and utterly DEAD WRONG.
It couldn’t be farther from the truth. In fact, there is no logical basis for this way of training whatsoever, and whoever dreamt up this downright ridiculous way of thinking has caused the vast majority of lifters to waste their time and impede their progress in the gym.
Let me clear this up once and for all: you CANNOT spot reduce. In other words, it is physically impossible to target fat loss from a specific area on your body. Performing bench presses with light resistance and high repetitions will not magically burn fat off of your chest or cause it to appear harder and more defined.
Every single time you wrap your hands around a barbell, dumbbell or cable, your goal is to stimulate as much muscle growth as you possibly can. There are no special, secret weightlifting exercises that will “define” your muscles or cause them to become more “ripped”.
Training with weights builds muscle mass, end of story.
So how exactly do you “define” a muscle?
The only way to “define” a muscle is by lowering your body fat level in order to make your muscles more visible. Body fat reduction can be achieved in two ways:
1) Modify your diet.
You should lower your overall caloric intake to around 15x your bodyweight and focus on consuming smaller meals more frequently throughout the day. This will keep your metabolism naturally raised at all times and will keep your body in a constant fat burning state. Limit your intake of saturated fats and simple sugars, and focus instead on consuming lean sources of protein and low glycemic carbohydrates. It is also very important to keep your water intake high at a level of around 0.6 ounces per pound of bodyweight.
2) Perform proper cardio workouts.
Let go of the traditional method of moderate intensity cardio in 30-45 minute durations. If you want to maximize your body’s fat burning capacity and also minimize the muscle loss that inevitably accompanies a fat burning cycle, focus on shorter cardio workouts performed at a high level of intensity. These types of workouts will shoot your resting metabolism through the roof and will allow you to burn maximum amounts of fat even when you are at rest. I recommend 3-5 high intensity cardio sessions per week, spaced at least 8 hours away from your weight workouts.
That’s all there is to it, folks. Take the notion of “light weight and higher reps” and throw it right out the window, down the street and around the corner. Following this misguided method will only cause you to lose muscle mass and strength, and will not assist you in burning fat or defining your physique.
All you need to do to mold those rock-solid muscles for the summer time is this:
1) Train with heavy weights and low repetitions to build maximum muscle mass.
2) Modify your diet and implement cardio workouts to eliminate body fat and create visibly harder and more defined muscles.
End of story.
I’ll see you at the beach!
Word Count: 679
After spinning the PLR article, modifying it and editing, this is my finished version below:
Reduce body fat with these 2 muscle building tips
Summer is definitely on its way, and it’s time to sit back, enjoy the weather, and relax under the cool sunny sky. It’s also time to enjoy playful days, backyard barbecues and the occasional swim, and for people who are a bit more concerned about staying in shape with exercise, fitness, and muscle building, there’s simply one thing that needs to get done… it’s time to strike an attitude with that body. Nobody really has ideas of walking around with a soft, flabby body, and for the following months, all of those serious muscle builders will be switching up their thinking and moving into workout mode.
What’s their secret?
They simply reduce the amount of weight they are lifting and concentrate on doing more reps.
It’s not some new idea, way of thinking, or even a new exercise strategy, in fact, it’s been used in the gym and within countless training sessions for years. It’s an accepted strategy that is often utilized by bodybuilders to cut down certain areas of the body. In fact, a lot of personal trainers explain to their clients that using heavier weights will build muscle and lighter weights will define them.
Would you like to understand more about the method of using lighter weight while doing high reps for getting a ripped and toned body?
Let’s focus here, this will be a crucial tip for you… IT’S PURE RUBBISH.
This couldn’t be falser. Realistically, there’s no basis for this strategy or method of training, and the person that came up this outlandish training method has only triggered a backlash of misguided individuals who are literally wasting time, effort, and ultimately hindering the progress of their workout program.
Here’s the deal: Spot Reducing CANNOT Be Achieved!
Truth is, it’s simply an impossibility to physically reduce a single region or target area of the body. So, once again, trying to reduce body fat from a certain targeted area of the body is basically impossible. For example, using lighter weight on the bench press and performing high repetitions will not produce any positive results to burn body fat from the area of the chest or even give rise to your chest area to appear tougher and more defined.
Each time you grab a cable, barbell or dumbbell, your objective is to stimulate as much muscle growth as you potentially can. There are no simple, quick-fix strategies, or hidden weight-lifting routines that can actually “specify” muscle groups or cause them to become more “ripped”.
When you train and workout using weights it will build muscle mass, period.
So how would you “explain” a muscle?
Realistically, the only process that can help to “define” a given muscle region is to drop body fat levels so they can make your muscles more noticeable. Body fat loss can be realized in the following fashion:
1) Change your eating habits.
You ought to reduce your general calorie consumption to around 15x bodyweight and focus on taking in smaller meals more often throughout the day. This will keep your metabolism naturally raised at all times and will keep your body in a consistent fat loss state. Limit your consumption of simple sugars and saturated fats, and focus instead on consuming lean sources of protein and low glycemic carbohydrates. It is also really important to keep your water consumption high at a level of around 0.6 ounces per pound of bodyweight.
2) Continue to do cardio exercises.
If you desire to maximize your body’s fat burning capacity and also reduce the muscle loss that undoubtedly accompanies a fat burning cycle, focus on much shorter cardio workouts performed at a high level of strength. These types of exercises will shoot your resting metabolic process through the sky and will allow you to burn optimal quantities of fat even when you are at rest.
That’s basically it, people. Take the idea or method of using lighter weights and doing higher reps and toss it right out the window. If you follow this mistaken approach it will only trigger you to gradually lose muscle mass and much needed strength, and it will not assist in burning body fat or even go as far as shaping your body the way that you want.
There’s one more thing I need to tell you, what you need to do to showcase those muscles for the summer is this:
• Workout with low repetitions and heavy weights to develop optimum muscle mass.
• Customize your diet, change your eating habits, and include cardio exercises to remove body fat and develop noticeably harder and more defined muscles.
Now… Forget the hype and start thinking summer fun!
Word Count: 776
Words Added: 97
The time it took me to edit and modify was roughly 10 minutes. So, the total time to add the content into Spin Rewriter, spin it, modify it, and edit for publishing was 16 minutes. Plus, I also added 97 words to the article. Not bad, huh? If you work that out, that’s almost 4 pieces of acceptable content per hour. I can live with that and definitely make use of them.
Of course, I want to set the record straight… I want to make it clear that the method and use of spinning content is not the best route in any circumstance. You heard that correctly. There’s only one way for truly deliverable content and that’s writing it yourself from scratch. Another option is to hire a writer or ghost writer to deliver content for you. This option is fine if you only require a few articles at a time. But if you need multiple articles over and over again, it can get expensive. And, another option is to use PLR content and manually rewrite it yourself.
Now, if you’re using a number of tier level sites or some other kind of sites and need a lot of content, I’d easily suggest the use of Spin Rewriter. Other than that, don’t bother with it or any other spinning software.
The bottom line with using Spin Rewriter is to provide content creators with different angles in rewriting PLR. From that point, I can modify and edit the content to fit various sites and projects. The whole point of this exercise is to give you proper direction and hopefully demonstrate useful ways to use tools that make sense and are more powerful at getting better results.
Thanks for reading and I hope you got a better understanding of article spinning and how you can use Spin Rewriter for your online business efforts.
If you were to ask if I recommend Spin Rewriter. My answer, most probably YES. (If you use it for the right reasons and the right way)